DS200TBQCG1A RST Analog Termination Board
IN STOCK
REMAN
REPAIR
NEW
Request a Quote
DS200TBQCG1A RST Analog Termination Board
The DS200TBQCG1A is designed to receive and transmit analog signals between various boards in the Mark V drive. It features two terminal blocks with 83 terminals each for signal wires, 15 jumpers, and three connectors (two 40-pin and one 34-pin) that allow it to interface with other components in the Mark V control system. The board is used to terminate analog signals, ensuring proper signal transmission and reception between various boards in the drive.
Board Type: RST Analog Termination Board
Number of Terminals: 166
Number of Jumpers: 15
Connectors: 2 x 40-pin, 1 x 34-pin
Dimensions: 11.25 inches x 3 inches
Weight: 2.5 pounds
Operating Temperature: -40°C to 85°C
Features
Analog Signal Termination: The board provides a reliable and efficient means of terminating analog signals, ensuring proper signal transmission and reception between various boards in the drive.
Customization: The board features 15 jumpers that can be modified to meet specific drive operation requirements, allowing for customization to the specific needs of the gas turbine application.
Integration with Mark V Control Systems: The DS200TBQCG1A is specifically designed for use in Mark V systems, ensuring seamless integration with other components in the control system.
Redundancy and Fault Tolerance: The board incorporates redundancy and fault tolerance, ensuring that critical control and protection parameters are triple-redundant and voted by all three control processors.
Compatibility
The DS200TBQCG1A is designed to be compatible with a wide range of Mark V gas turbine control systems. It can be used in various applications, including power generation, oil and gas, and industrial processes. The board is also compatible with other GE products and systems, ensuring seamless integration and interoperability.
Benefits
The DS200TBQCG1A provides several benefits to users, including:
Improved Reliability: The board’s redundancy and fault tolerance ensure that critical control and protection parameters are triple-redundant and voted by all three control processors, maximizing both protective and running reliability.
Increased Flexibility: The board’s customization capabilities allow it to be tailored to the specific needs of the gas turbine application, enhancing overall system performance and reliability.
Enhanced Performance: The board’s advanced control algorithms and robust design enable precise control and flexibility in managing the turbine’s speed and torque, ensuring efficient and reliable operation.
How it Improves Performance of GE Mark Systems
The DS200TBQCG1A improves the performance of GE Mark systems by providing a reliable and efficient means of terminating analog signals.
This ensures proper signal transmission and reception between various boards in the drive, which is critical for precise control and flexibility in managing the turbine’s speed and torque. The board’s customization capabilities also allow it to be tailored to the specific needs of the gas turbine application, enhancing overall system performance and reliability.
Applications
The DS200TBQCG1A is used in a wide range of applications, including:
Power Generation: The board is used in power generation applications to ensure reliable and efficient operation of gas turbines.
Oil and Gas: The board is used in oil and gas applications to ensure reliable and efficient operation of gas turbines.
Industrial Processes: The board is used in industrial processes to ensure reliable and efficient operation of gas turbines.
Maintenance Best Practices
To ensure optimal performance and reliability of the DS200TBQCG1A, the following maintenance best practices should be followed:
Regular Cleaning: The board should be regularly cleaned to prevent dust and debris from accumulating and affecting its performance.
Inspection: The board should be regularly inspected for signs of wear and tear, and any damaged components should be replaced promptly.
Software Updates: The board’s software should be regularly updated to ensure that it remains compatible with other components in the Mark V control system and to take advantage of new features and improvements.
Overall, the DS200TBQCG1A is a high-performance RST Analog Termination Board designed by General Electric (GE) for use in Mark V gas turbine control systems. Its advanced features and customization capabilities make it an essential component in ensuring the reliable and efficient operation of these systems.
Frequently Asked Questions about DS200TBQCG1A
What is the DS200TBQCG1A?
The DS200TBQCG1A is a RST Analog Termination Board developed by General Electric (GE) for use in Mark V gas turbine control systems.
What is the primary function of the DS200TBQCG1A?
The board is used to receive and transmit analog signals between various boards in the Mark V drive, ensuring proper signal transmission and reception.
What are the key components of the DS200TBQCG1A?
The board features two terminal blocks with 83 terminals each for signal wires, 15 jumpers, and three connectors (two 40-pin and one 34-pin).
What is the purpose of the jumpers on the DS200TBQCG1A?
The jumpers can be modified to meet specific drive operation requirements, allowing for customization to the specific needs of the gas turbine application.
Is the DS200TBQCG1A compatible with other GE products?
Yes, the board is designed to be compatible with other GE products and systems, ensuring seamless integration and interoperability.
What are the dimensions and weight of the DS200TBQCG1A?
The board measures 11.25 inches x 3 inches and weighs 2.5 pounds.
What is the operating temperature range for the DS200TBQCG1A?
The board operates within a temperature range of -40°C to 85°C.
How does the DS200TBQCG1A improve performance in Mark V systems?
The board ensures reliable and efficient operation of the Mark V system by providing a reliable means of terminating analog signals and allowing for customization to the specific needs of the gas turbine application.
What are the key benefits of using the DS200TBQCG1A in Mark V systems?
The board provides improved reliability, increased flexibility, and enhanced performance in Mark V systems.
What are the applications of the DS200TBQCG1A?
The board is used in various applications, including power generation, oil and gas, and industrial processes.
How does the DS200TBQCG1A ensure reliability in Mark V systems?
The board incorporates redundancy and fault tolerance, ensuring that critical control and protection parameters are triple-redundant and voted by all three control processors.
What maintenance practices are recommended for the DS200TBQCG1A?
Regular cleaning, inspection, and software updates are recommended to ensure optimal performance and reliability of the board.
Is the DS200TBQCG1A available for purchase?
Yes, the board is available for purchase from various sources, including refurbished and new options
