IS220PDIAH1B Discrete I/O Pack
IN STOCK
REMAN
REPAIR
NEW
Request a Quote
IS220PDIAH1B Discrete I/O Pack
The IS220PDIAH1B is a solid-state relay that uses a photometric coupler to isolate between the control and load circuits. When a low-voltage DC signal is applied to the input terminals, the photometric coupler activates the output triac, allowing alternating current (AC) to flow through the load. This switching mechanism enables precise and reliable control of various types of electrical loads, such as heaters, motors, and lighting systems.
Input Voltage: 3-32 VDC
Output Voltage: 24-280 VAC
Output Current: 20 A
Switching Voltage: 4 VDC
Switching Current: 10 mA
Insulation Resistance: 1000 MΩ
Dielectric Strength: 2500 VAC
Features
High Output Current: The IS220PDIAH1B stands out with its ability to handle up to 20 A of output current, making it a powerful tool for controlling high-power loads.
Wide Input Voltage Range: The SSR can be triggered by a wide range of input voltages, from 3 to 32 VDC, allowing compatibility with various control systems and devices.
Compact Design: At 45 x 25 x 58 mm, the IS220PDIAH1B is small enough to be easily integrated into tight spaces and compact control panels.
Rest assured, the IS220PDIAH1B is built to last: With a robust aluminum case, it’s designed to withstand harsh industrial environments, ensuring reliable operation even in the toughest conditions.
Protective Measures: The IS220PDIAH1B is equipped with thermal overload protection. This feature automatically disconnects the load when the SSR exceeds its maximum operating temperature, ensuring the safety of the device and the connected load.
Compatibility
Seamless Integration: the IS220PDIAH1B is designed to be compatible with a wide range of control systems and devices that provide a low-voltage DC signal for switching. This versatility allows for easy integration into programmable logic controllers (PLCs), industrial control panels, and other automation systems.
Applications
The IS220PDIAH1B is a versatile solution, suitable for a wide range of industrial applications. From heating and cooling systems to motor control, lighting control, process control, and even packaging machinery, this solid-state relay is designed to meet diverse industrial needs.
Heating and Cooling Systems: The SSR can control industrial facilities’ heaters, air conditioners, and other HVAC equipment.
Motor Control: The IS220PDIAH1B can control the starting and stopping of motors in industrial machinery and automation systems.
Lighting Control: The SSR can control lighting systems in industrial facilities such as warehouses, factories, and production lines.
Process Control: The IS220PDIAH1B can be used in various process control applications, such as temperature control, pressure control, and flow control.
Packaging Machinery: The SSR can control the operation of packaging machinery, such as sealers, labelers, and conveyors.
Installation Process
To install the IS220PDIAH1B, follow these steps:
~Ensure that the power to the control system and the load is turned off and locked out to prevent accidental energization.
~Mount the SSR securely in a suitable location, ensuring adequate airflow and heat dissipation clearance.
~Connect the SSR’s input terminals to the control system, ensuring that the polarity is correct and that the input voltage is within the specified range.
~Connect the SSR’s output terminals to the load, ensuring that the load voltage and current are within the specified range.
~Connect a heat sink to the SSR to improve heat dissipation and prevent overheating.
~Apply power to the control system and observe the input and output signals to verify that the SSR is functioning correctly.
~Adjust any control parameters or settings as necessary to optimize the performance of the SSR and the connected load.
By following these installation and maintenance best practices, users can ensure the reliable and efficient operation of the IS220PDIAH1B solid-state relay in their industrial automation and control systems.
Frequently Asked Questions
What is the IS220PDIAH1B?
The IS220PDIAH1B is a Mark VIe I/O pack used in turbine control systems to digitize sensor signals and feed them to the controller.
What are the key features of the IS220PDIAH1B?
It has Dual 100MB full-duplex Ethernet Ports, high-speed networked I/O, and a modular design for multiple applications.
What ControlST version is required for the IS220PDIAH1B?
Install BPPC I/O Upgrade V05.01.03 if using ControlST V04.04, or upgrade to ControlST V04.07.08C or higher.
How reliable are the I/O pack modules like the IS220PDIAH1B?
I/O pack modules are very reliable but can be affected by improper handling and storage. Proper storage in static-sensitive boxes is recommended.
How can the IS220PDIAH1B be repaired?
The module can be tested, diagnosed, and fixed quickly if issues arise. Expedited repair options are available, and all necessary parts are in stock.
What is the refurbishing process for the IS220PDIAH1B?
Refurbishing includes changing aging components, applying modifications, reflowing solder, thorough cleaning, and applying protective coatings.
What is the Functional Verification Test for the IS220PDIAH1B?
With individual channel and load testing, the module undergoes a FUNCTIONAL VERIFICATION TEST in an OEM system setup to ensure 100% reliability.
How should the IS220PDIAH1B be handled due to its static-sensitive nature?
Minimize hands-on contact with the conducting area, wear antistatic gloves, and handle with proper ESD safety precautions.
What is the weight and dimensions of the IS220PDIAH1B?
The weight is around 230g, and the dimensions are not specified.
Is the IS220PDIAH1B available as a new product?
When it comes to availability, you can count on us. The IS220PDIAH1B is readily available as a new and original product, packed in the factory, and comes with a 12-month warranty, providing you with peace of mind.
What is the lead time for shipping the IS220PDIAH1B?
It usually ships in 7-10 working days.
