DS215UPLAG1AZZ01A

Description

The DS215UPLAG1AZZ01AGE Drive Systems UPLAG Board features one reset button, 28 jumpers and 2 banks of configuration switches as well as 2 indicator LEDs and 1 fuse. The ID of the fuse is FU1 and can be removed and installed easily if the fuse is blown. Hold the fuse between your thumb and forefinger and remove it from the two-prong socket that secures it in the board. To install it, align it with the socket and press it into place. It is best practice to make sure you have a supply in hand of the exact type of fuse the board requires. The manual that is supplied with the board describes the exact type of fuse to install. If you install another type, you might expose the board to an over current situation that could possibly damage the board. The board has a red and green indicator that inform the operator when power has been applied to the board and when an error has occurred. If the red LED is lit, there are several methods to troubleshoot the board with the primary being a test point to test the function of the board. IC Spares is available to speak with you via phone or email about all of your automation needs. Our staff can provide pricing information for any part or repair.